Instalar Windows IoT sa Raspberry Pi sa paggamit sa Windows 8.1 / 7 (Ang / applydrive kapilian wala giila sa niini nga konteksto.)

If you are setting up Windows IoT on the Raspberry Pi, you will only be able to install using the Microsoft instructions using a Windows 10 OS.

Kon ikaw sa paggamit sa Windows 7, 8 o 8.1 nan ikaw sa pagkuha sa mga “Ang / applydrive kapilian wala giila sa niini nga konteksto.” error. This is because the dism.exe version on Windows 7, 8 ug 8.1 ang lain-laing sa sa sa dism.exe sa Windows 10.

Adunay usa ka sayon ​​nga paagi sa pag-instalar Windows IoT sa Windows 7, 8 o 8.1. Just follow the following instructions.

  1. Download the Raspberry Pi2 Windows IoT latest build from Microsoft Connect
    Windows IoT Build for Raspberry Pi 2 from Microsoft Connect
  2. Kinuha ang zip file sa c:/yacht
  3. Download imgmount and place the exe file to c:/yacht
  4. Open a administrator command prompt and go to c:/iot and type imgmount flash.ffu. This will convert the ffu to a VHD image and mount it in Disk Management
  5. Go to disk management and detach the VHD
    Disk Management Detach VHD
  6. Next is to restore the VHD file to the SD Card using winimage
  7. Download winimage and install. Open the winimage administrator
  8. Click Disk from the menu and choose Restore Virtual Hard Disk image on physical drive
  9. Select your SD Card from the list and navigate to the VHD file which should be the following path “C:\Users\{user}\AppData\Local\Temp” .

Restoring the image onto the SD Card can take a while. After it is complete insert the SD Card into the Raspberry Pi 2 and all should be working.