ການ​ຕິດ​ຕັ້ງ Windows IOT ໃນ Raspberry Pi ໃຊ້ Windows 8.1 / 7 (ທາງ​ເລືອກ applydrive / ບໍ່​ໄດ້​ຮັບ​ການ​ຍອມ​ຮັບ​ໃນ​ສະ​ພາບ​ການ​ນີ້​.)

ລົງໃສ່ ໂດຍ

ຖ້າ​ຫາກ​ວ່າ​ທ່ານ​ກໍາ​ລັງ​ຕັ້ງ Windows IOT ໃນ Raspberry Pi, ທ່ານ​ພຽງ​ແຕ່​ຈະ​ສາ​ມາດ​ຕິດ​ຕັ້ງ​ໂດຍ​ນໍາ​ໃຊ້​ຄໍາ​ແນະ​ນໍາ Microsoft ການ​ນໍາ​ໃຊ້ Windows ໄດ້ 10 OS.

ຖ້າ​ຫາກ​ທ່ານ​ກໍາ​ລັງ​ໃຊ້ Windows 7, 8 ຫຼື 8.1 ຫຼັງ​ຈາກ​ນັ້ນ​ທ່ານ​ຈະ​ໄດ້​ຮັບ “ທາງ​ເລືອກ applydrive / ບໍ່​ໄດ້​ຮັບ​ການ​ຍອມ​ຮັບ​ໃນ​ສະ​ພາບ​ການ​ນີ້​.” ຄວາມຜິດພາດ. This is because the dism.exe version on Windows 7, 8 ແລະ 8.1 ແມ່ນ​ແຕກ​ຕ່າງ​ກັນ​ກັບ dism.exe ກ່ຽວ​ກັບ Windows ໄດ້ 10.

ມີ​ວິ​ທີ​ທີ່​ງ່າຍ​ທີ່​ຈະ​ຕິດ​ຕັ້ງ Windows IOT ໃນ Windows ເປັນ 7, 8 ຫຼື 8.1. Just follow the following instructions.

  1. Download the Raspberry Pi2 Windows IoT latest build from Microsoft Connect
    Windows IoT Build for Raspberry Pi 2 from Microsoft Connect
  2. ສານ​ສະ​ກັດ​ຈາກ​ໄຟລ​໌​ຫັດ​ໄປ​ສະ​ນີ​ທີ່ C:/yacht
  3. ດາວ​ໂຫລດ imgmount and place the exe file to c:/yacht
  4. Open a administrator command prompt and go to c:/iot and type imgmount Flash.ffu. This will convert the ffu to a VHD image and mount it in Disk Management
  5. Go to disk management and detach the VHD
    Disk Management Detach VHD
  6. Next is to restore the VHD file to the SD Card using winimage
  7. ດາວ​ໂຫລດ winimage and install. Open the winimage administrator
  8. Click Disk from the menu and choose Restore Virtual Hard Disk image on physical drive
  9. Select your SD Card from the list and navigate to the VHD file which should be the following path “C:\Users\{ຜູ້ໃຊ້}\AppData\Local\Temp” .

Restoring the image onto the SD Card can take a while. After it is complete insert the SD Card into the Raspberry Pi 2 and all should be working.